Deante Kerria Plus Chrome Bi-Fold Shower Door

The Deante Kerria Plus bi-fold shower door in chrome folds back on itself as it opens, so it needs far less floor space in front of the shower than a hinged door. That makes it a good fit for small en-suites, where a full-width door would hit the toilet, basin or radiator. The two panels are 6 mm tempered TOTALWHITE low-iron glass, which is clearer than standard float glass and has no green edge. Deante's Active Cover coating helps water and limescale run off. The hinges sit flush with the glass, so there are no hinge recesses to scrub.

Will it fit? Each size is nominal, so measure your opening wall to wall. Fitted into a recess, the door fits a 675–700 mm opening for the 700 mm size, 775–800 mm for 800 mm, 875–900 mm for 900 mm and 975–1000 mm for 1000 mm. The door is 2000 mm high. It is reversible, so the same door can be hung opening to the left or the right: there is no left or right version to choose. It can stand on a shower tray or go straight onto a tiled floor for a level-access shower. Deante supplies the handle with the door. The door also pairs with a Kerria Plus side panel to make a corner enclosure. The delivery estimate above is based on Deante's current stock for the size you pick.

• Series: Deante Kerria Plus
• Type: Bi-fold (folding) shower door, reversible
• Sizes: 700, 800, 900, 1000 mm nominal × 2000 mm high
• Recess fitting range: 675–700 / 775–800 / 875–900 / 975–1000 mm
• Glass: 6 mm tempered TOTALWHITE transparent, Active Cover hydrophobic coating
• Hinges: lifting hinges, flush with the glass, silent closing
• Finish: Chrome. Also available in black.
• Installation: on a shower tray or directly on tiles; wall profiles level out walls that are slightly off plumb
• Standard: impact, chemical and stain resistance to PN-EN 14428+A1:2008

Downloads

• Technical drawing (PDF)
• Installation manual (PDF)
• Care instructions (PDF)
• Warranty card (PDF)

Please select the required door size from the options above.