Sealing Membrane DRY 50 REVESTECH for Waterproofing & Tanking Bathrooms and other Wet Rooms Floors & Walls.
A crack-bridging sheet waterproofing membrane REVESTECH DRY 50 consists of thermoplastic polyolefin laminated with nonwoven polypropylene on both of its sides. Coated with polypropylene fibers for optimal grip with the tile adhesive C2-S1, used in all installations.
DRY 50 waterproofing membrane is used to achieve the waterproofness for the walls and floors in bathrooms before the tile installation. Also, can be used for outdoor applications up to 15m².
The watertight covering DRY 50 is intended to be installed as a waterproofing membrane under ceramic tiles and natural stones:
- in private and public shower rooms
- in bathrooms
- in laundry rooms
- in toilets
- on heated floor
- for wall and floor applications
- in interior areas
- outdoors (balconies, terraces, courtyards) areas up to 15m².
The membrane should be bonded to an even load bearing substrate using the appropriate tile adhesive C2-S1. Each membrane sheet should overlap the previous one at the joints by a minimum of 50mm.
CHARACTERISTICS / ADVANTAGES
- Fast & easy installation
- Crack bridging
- High water vapour tightness
Good adhesion to tile adhesive
- Chemically resistant
WHAT’S IN THE BOX
Sealing Membrane DRY 50 amount of m2 ordered.
Composition – thermoplastic polyolefin laminated with nonwoven polypropylene on both of its sides
Packaging – roll 1.2 m x 30 m (36 sq/m)
Appearance / Colour – yellow
Storage Conditions – in cool, dry conditions in a horizontal position
Overall Thickness – approx. .5 mm
Mass Per Unit Area – approx. 335 g/m²